AOBCM40024 24 VOLT COMPRESSOR
This 24 volt compressor has A full Steel body and an output of 1.76 cfm. With a maximum output of 200 Psi and a duty cycle of 100% at 72 deg F&100 psi it will provide you with enough air for all your needs.
The Following Items included in the Package:
Fill tires, Run Air jacks, Pump up mattresses and inflatable boats in good time, run your air lockers, air bags and train horns, even run small Pneumatic air tools all from your 4WD or car.
Specifications:
The performance data | |||||
PSI | CFM | A | |||
0 | 1.76 | 10 | |||
10 | 1.66 | 12 | |||
20 | 1.59 | 13 | |||
30 | 1.52 | 14 | |||
40 | 1.45 | 16 | |||
50 | 1.41 | 17 | |||
60 | 1.34 | 18 | |||
70 | 1.27 | 18 | |||
80 | 1.2 | 19 | |||
90 | 1.16 | 19 | |||
100 | 1.13 | 19 | |||
110 | 1.06 | 20 | |||
120 | 1.02 | 20 | |||
130 | 0.95 | 20 | |||
140 | 0.92 | 19 | |||
150 | 0.85 | 19 | |||
160 | 0.81 | 19 | |||
170 | 0.74 | 19 | |||
180 | 0.7 | 19 | |||
190 | 0.63 | 18 | |||
200 | 0.56 | 18 |
Fill Rates | |
9 Litre Tank | Fill Rate |
0 To 145 PSI | 2 Min. 29 Sec. |
110 To 145 PSI | 57 Sec. |
0 to 200 PSI | 5 Min. 02 Sec. |
165 to 200 PSI | 1 Min. 23 Sec. |
18 Litre Tank | Fill Rate |
0 To 145 PSI | 6 Min. 02 Sec. |
110 To 145 PSI | 1 Min. 55 Sec. |
0 to 200 PSI | 10 Min. 08 Sec. |
165 to 200 PSI | 2 Min. 20 Sec. |
Duty Cycle Reference Chart | |
DUTY CYCLE @100SPI / 72°F | MINUTES ON/OFF |
15% | 6 Min. On / 34 Min. Off |
20% | 8 Min. On / 32 Min. Off |
25% | 10 Min. On / 30 Min. Off |
30% | 13 Min. On / 30 Min. Off. |
33% | 15 Min. On / 30 Min. Off |
100%(AOBCM400) | Continuous Duty |
AOBCM40024 COMPRESSOR
WIRING KIT
Everything you need to install and wire this compressor is include in the sale price. Don't get court by buying 24 volt compressors with out the CORRECT wiring kit. By buying it all included you can be assured that you will receive the correct size fuses, relays, switches and wire.
RUBBER MOUNT
The compressor is fixed to the tank by rubber vibration pads to protect the compressor from excessive vibration.
It is not recommended to mount any 24 volt compressor up side down. Whilst it will still run mounted in this position, the problem is caused by the heat generated by the compressor not escaping correctly and radiating back through the compressor body into the windings. This causing damage to the motor and premature failure of the compressor.