The kit comes with all the following items:
It can be used to fill tires, run Air jacks, pump up mattresses and inflatable boats in good time, run your air lockers, air bags and train horns, even run small Pneumatic air tools all from your 4WD or car.
AOBCM400 COMPRESSOR
Sitting A-Top of this unit is ''Air ON Boards'' very impressive little 12 Volt compressor part number AOBCM400.
It has a full Steel body and out preforms all 12 volt compressors of its type on the market today. With a maximum output of 200 Psi and a duty cycle of 100% at 72 deg F and 100 Psi it will provide you with enough air for all your needs.
DRAIN VALVE
Drain valve comes with it and ready to be installed.
PRESSURE SWITCH
Included on the compressor is a pressure switch that is preset to cycle your compressor on at 120 Psi and off at 150 Psi
SAFETY VALVE
A must for all compressor is this safety valve. It is set to release the tank pressure should it exceed 165 Psi
WIRING KIT
Everything you need to install and wire this compressor is include in the sale price. Don't get court by buying 12 volt compressors with out the CORRECT wiring kit. By buying it all included you can be assured that you will receive the correct size fuses, relays, switches and wire.
RUBBER MOUNT
The compressor is fixed to the tank by rubber vibration pads to protect the compressor from excessive vibration.
It is not recommended to mount any 12 volt compressor up side down. Whilst it will still run mounted in this position, the problem is caused by the heat generated by the compressor not escaping correctly and radiating back through the compressor body into the windings. This causing damage to the motor and premature failure of the compressor.
Comp Max Pressure | 200Psi |
---|---|
Horn | Without Horn |
Tank | 9 Litre |