24 Volt 200psi compressor and 9 Litre tank Universal Kit
$392.00
A universal complete air system with one 24 Volt 200psi compressor, 9 Litre 220psi tank and other accessories included
Availability:
Out of stock
SKU
AOBCM50024
AOBCM50024 All in one Compressor and Tank Kit
The kit comes with all the following items:
- ''Air On Boards'' AOBCM40024 compressor
- 9 litre tank rated at 220psi
- 120 Psi on / 150 Psi off heavy duty pressure switch
- Drain valve
- Safety valve
- Mounting Bolts
- Inline discharge check valve
- Rubber bush compressor mount
- Full wiring kit
- Instruction Manual
It can be used to fill tires, run Air jacks, pump up mattresses and inflatable boats in good time, run your air lockers, air bags and train horns, even run small Pneumatic air tools all from your 4WD or car.
- 24-Volt DC
- Duty cycle: 100% @ 100psi
- Max working pressure: 200 psi
- Amp draw: 12 Amps
- Dimensions: 485mm L x 151mm W x 362mm H
- Dimensions 485 mm long 160 mm wide 390 mm high (at compressor head)
- Fill time: 0 to 150psi = 3 minutes, 33 seconds.
- Fill a 31/10.5/R15 Tyre from 16 psi to 34 psi in a 38 seconds
AOBCM40024 COMPRESSOR
Sitting A-Top of this unit is ''Air ON Boards'' very impressive little 24 Volt compressor part number AOBCM40024.
It has a full Steel body and out preforms all 24 volt compressors of its type on the market today. With a maximum output of 200 Psi and a duty cycle of 100% at 72 deg F and 100 Psi it will provide you with enough air for all your needs.
DRAIN VALVE
Drain valve comes with it and ready to be installed.
PRESSURE SWITCH
Included on the compressor is a pressure switch that is preset to cycle your compressor on at 120 Psi and off at 150 Psi
SAFETY VALVE
A must for all compressor is this safety valve. It is set to release the tank pressure should it exceed 165 Psi
WIRING KIT
Everything you need to install and wire this compressor is include in the sale price. Don't get court by buying 24 volt compressors with out the CORRECT wiring kit. By buying it all included you can be assured that you will receive the correct size fuses, relays, switches and wire.
- 100 mm black earth cable.
- 24 volt 30 amp relay.
- 3mtr 4mm power cable.
- 3mtr 3mm power cable.
- low amp fuse holder.
- High amp fuse holder.
- 24 volt rocker switch.
- All connectors, pre-wired ready to install .
RUBBER MOUNT
The compressor is fixed to the tank by rubber vibration pads to protect the compressor from excessive vibration.
It is not recommended to mount any compressor up side down. Whilst it will still run mounted in this position, the problem is caused by the heat generated by the compressor not escaping correctly and radiating back through the compressor body into the windings. This causing damage to the motor and premature failure of the compressor.
| Comp Max Pressure | 200Psi |
|---|---|
| Horn | Without Horn |
| Tank | 9 Litre |
Write Your Own Review