As low as $197.30
In stock
This panel is fitted with one of AOB's high quality 52mm 200 psi Illuminated Single needle gauge sets along with 1 AOB Air control paddle switches and 1 AOB 12 volt compressor switch. This clever unit lets you turn on/off your 12 volt compressor and then control your front or rear air bags with out the use of 12 volt solenoids.
Both rear off the one switch or Both front off the one switch.
This gauge and switch set comes completely assembled for easy installation using the best quality PU air fittings available. Inlet and outlet is by 1/4'' PU hose.
The air paddle switch allows air to flow to your airbags by pushing the switch down and allows air to escape to atmosphere from the air bags by pushing the switch up. The maximum pressure of the air paddle switch is 110 psi.
The panel face measures 145mm wide 79mm high and 85mm deep.
The 12 volt compressor switch illuminates when turned on and is rated at 16amp
With a 200 psi max working pressure it is sure to survive the most rigorous out back travel
(Air compressor is needed to operate this switch set, not included)
Gauge Needle | Single Needle |
---|---|
Gauges | 1 |
Pressure Max (PSI) | 200 |