1/4 BSP male to 12mm hose

For sale is a brand new 1/4 BSP male to 12mm hose
for an on board air system

Push-in fittings for pneumatics

Used for a quick and simple connection between any 2 components like air tank to nitto outlets or tank to tank. We don't recommend using them from the air compressor due to the high heat generated

Pneumatic push-in fittings are the standard on the pneumatic fittings market and are very widely used. What sets them apart is the easy release function for the tube, i.e. by pressing a releasing ring. These fittings are used with the standard O.D. tubing that is commonly available on the market.

Specifications

• Working environment: 0-10 bar/0 to 145 PSI. Working temperature: 0-60°C. Applicable hose: PU/nylon/PE
• These fittings are made of high-quality plastic/polyurethane, durable and without air leakage for long-term use. Built-in stainless steel locking claw and NBR O-ring
• Easy to install: no additional sealing is required, just a simple push to connect . Elliptical release rings at both ends making it easy to disassemble without additional tools.
• Highly recommend using a hose cutter as end of hose must be cut square to have a perfect seal

Other pneumatics push-in fittings are also available, inlcuding our T piece for 12mm hose , Joiner for 12mm hose and 1/4 BSP Female to 12mm hose.