Front & Rear Recovery Tow Points kit 2200H-BLUE for FORD MAVERICK

Front and Rear Tow Points Kit
Fits FORD MAVERICK

For sale is a pair of recovery tow points for FRONT and one single tow bar recovery hitch for REAR.

FRONT RECOVERY TOW POINTS

Tow points are a must have for anyone considering any type of off road or remote touring. The factory two points are no better than a tie down point for transport. This Heavy Duty Recovery tow point will allow you to use a Bridle strap and recovery gear to ensure an even pull in a recovery situation..

Your purchase will include high tensile bolts and nuts to ensure secure fitment to vehicles. Correct fitment of these components is critical for yours & others personal safety.

Each Tow Point is supplied with vehicle specific fitment instructions. These instructions should be followed during fitment to ensure all steps are taken for correct installation, so when required, the points will be at their optimum Working Load Limit (WLL) as stamped. It is the Tow Points themselves as supplied that have been tested to the WLL advised. It is at the vehicle owners discretion for fitment, ensuring that the chassis is adequately designed, constructed and rated to suit this application.

It is recommended that Tow Points are fitted by a qualified mechanic with specialist 4WD knowledge, who has an understanding of your vehicle including weights carried, the style of Bull Bar, general usage etc. as in some circumstances these Tow Points may not be suitable for your vehicle.

Tow Point Specifications:

• Made from 12mm plate Steel
• Supplied with Hi Tensile Bolts and nuts
• Direct bolt on to your chassis
• No cutting or welding required in most cases
• Sold as a pair
• Option of using a Bridle strap
• Powder coated Blue for Hi visibility
• WLL Stamped to 5000kg

5T REAR RECOVERY POINT

Convert your standard Hayman Reece style towbar into a rated recovery point.Simply remove your towbar tongue and replace with this hitch!

Perfect for those vehicles who have trouble mounting rear recovery points. This is designed to mount into your style hitch.

You should never ever use a Tow ball for recovery purposes, they're not rated for the loads applied when performing vehicle recovery. This Recovery hitch will replace the tow ball and is rated for the job!

The Recovery Hitch is produced from High Strength mild steel, Finished with a powder coating to keep it durable and a clean finish. It has 4 holes to attach vertically or horizontally for any recovery situation.

Specifications:

• GREY Powder-Coated
• WLL: Rated 5T
• SIZE(L x W x H): 158 x 49 x 49 mm
• Use with 4.75T Shackles