Recovery Tow Points Kit 3100E Blue for Mitsubishi Challenger PB PC
As low as $137.20
Recovery Tow Points Kit WITH BRIDLE + SHACKLES INCLUDED for Mitsubishi Challenger PB PC56
MADE WITH AUSTRALIAN STEEL
In stock
SKU
RP3100E-Challenger-BLUE-AU
Heavy Duty Tow Points Kit
With Bridle + Shackles Included
FOR Mitsubishi Challenger PB PC
WARNING
MOST RECOVERY POINTS SOLD ON THE MARKET ARE NOT MADE WITH AUSTRALIAN STEEL. OUR'S ARE MADE RIGHT HERE IN MELBOURNE USING QUALITY AUSTRALIAN STEEL
IF THE PRICE IS CHEAP ASK YOURSELF WHY?
(Please NOTE: The color of Shackles May Vary)
| Will fit with: opposite lock xrox (no bash plate) arb factory bumper |
Won't fit with: ironman MCC genuine bullbar nudgebar |
Tow points are a must have for anyone considering any type of off road or remote touring. The factory two points are no better than a tie down point for transport. This Heavy Duty Recovery tow point will allow you to use a Bridle strap and recovery gear to ensure an even pull in a recovery situation.
Your purchase will include high tensile bolts and nuts to ensure secure fitment to vehicles. Correct fitment of these components is critical for yours & others personal safety.
Each Tow Point is supplied with vehicle specific fitment instructions. These instructions should be followed during fitment to ensure all steps are taken for correct installation, so when required, the points will be at their optimum Working Load Limit (WLL) as stamped. It is the Tow Points themselves as supplied that have been tested to the WLL advised. It is at the vehicle owners discretion for fitment, ensuring that the chassis is adequately designed, constructed and rated to suit this application.
It is recommended that Tow Points are fitted by a qualified mechanic with specialist 4WD knowledge, who has an understanding of your vehicle including weights carried, the style of Bull Bar, general usage etc. as in some circumstances these Tow Points may not be suitable for your vehicle.
Tow Point Specifications:
- Made from 12mm plate Steel
- Supplied with Hi Tensile Bolts and nuts
- Direct bolt on to your chassis using 1 factory hole (2 other holes need to be drilled per side)
- No cutting or welding required in most cases
- Sold as a pair
- Option of using a Bridle strap
- Powder coated BLUE for Hi visibility
- WLL Stamped to 5000kg
Bridle Specifications:
- Color: Green
- Length: 3M
- Width: 75mm
- Minimun Breaking Strength: 10000KG
Shackles Specifications:
- Color: Green + Black
- WLL: 4.75t
| Color | BLUE |
|---|---|
| Color | Powder coated Blue |
| Plate Material | 12mm Plate Steel |
| Package | Tow Points Pack |
| Working Load Limit (WLL) | 5000/kg Each |
| Car Model | Mitsubishi Challenger |
Write Your Own Review