AOBCM680 12 Volt Compressor and Tank Kit *Must be mounted upright only* *Must be mounted in a clean and dry area only*
This all in one 12 volt compressor and 3 Litre tank system has high flow Rate of 1.27CFM and lower 12 Amp current draw.
The kit comes with all the following items:
12 Volt Inbuilt compressor
Permanent Magnetic Motor
3.0 Litre 0.8 gallon tank
85Psi on / 105 Psi off pressure switch
Inline Check Valve
120 psi pressure gauge
Mounting Bolts
Full wiring kit
Instructions
Ideal for lighter duty applications, run your air lockers, air horns all from your 4WD or car.
Whilst this sort of compact 12 volt system will not give you the amount of air that our full air systems will, it still comes with an impressive set of figures:
Dimensions: 432 mm L x 160 mm W x181 mm H
Mounting legs 145 mm wide (between 2 bolt holes' center)
Amp Draw: 12A
Thermal Protection: YES
Tank Fill Time (0-105psi): 1Min.58Sec
Recovery Time (85-105psi): 21 Sec
Pressure Max: 120 psi
Duty Cycle: 10% at 100 psi
Flow Rate: 1.27 CFM (36LPM) at 0 psi
Please note the drain tap sits lower than the mounting feet which requires either a hole to be drilled to give clearance or spacers to lift the compressor up
WIRING KIT
Everything you need to install and wire this compressor is include in the sale price. Don't get court by buying 12 volt compressors with out the CORRECT wiring kit. By buying it all included you can be assured that you will receive the correct size fuses, relays, switches and wire.