Pressure Gauge Panel with Dual Digital Gauge Red + Dual Air Switch + 10 meter Air Hose

Digital Air Pressure Gauge Panel Kit

Features

Dual Digital Gauge

• 100% Brand New and High Quality
• Easy to use and install, seamlessly integrates with the vehicle interior
• 52mm dual air pressure gauge with Red LED readings of pressure, rapid and accurate response, easy to read.
• High contrast PMVA LCD screen and high quality sensors with heat-resistant.
• The sensors are full electronic, so there is no chance of a leak occurring in tubing going to inside your cab, as there is none! Only wiring.
• Try to avoid having the sensors located where water can accumulate, best place is the top of any air reservoir.

Dual Air Switch

This panel is fitted with one of AOB’s Dual Air Pressure Digital Gauge sets along with 2 AOB Air control paddle switches. This clever unit lets you control, with out the use of 12 volt solenoids, any of the following combinations of your air bags.

• Both rear off one switch and Both front off the other.
• Both left off one switch and both right off the other.
• Left rear off one switch and Right rear off the other.
• Left front off one switch and right front off the other.

The 2 air paddle switches allows air to flow to your airbags by pushing the switch down and allows air to escape to atmosphere from the air bags by pushing the switch up.The maximum pressure of the air paddle switch is 110 psi.

The panel face measures 145mm wide 79mm high and 85mm deep..

Benefits of a Digital Dual Air Pressure Gauge Setup

Get twice the impact with AOB’s dual air pressure gauges for trucks and cars, which give you the ability to monitor two air pressure sources at the same time. A dual electronic air pressure gauge is ideal in a multi-valve setup with left air pressure systems versus right, front versus back, or a tank PSI versus system PSI. In the case of air leveling systems, you can have kits installed for different parts of your vehicle. If you have two rear air bags, for example, you can monitor the left and right air bags simultaneously.

Why Do I Need a Dual Air Suspension Gauge?

Having precise, readily-available readings can help drivers keep an eye on the pressure levels of anything from tires to aftermarket air suspension systems. This comes in handy if you’re making purely aesthetic modifications to your vehicle for show, or you’re using it for work tasks like towing large hauls over long distances. Instead of realizing there’s a problem after you’ve lost a significant amount of pressure, the best air pressure gauge for your car or truck will provide you with accurate readings in real time to show if levels are slowly decreasing or running too low to begin with.

Specification

• Voltage: DC12V
• Diameter Size: 2" (52mm)
• Material: Aluminum Alloy & Plastic
• Current: IGN Maximum 0.3A ILM 0.3A
• Color: Black
• Light Color: Red
• Unit: PSI
• Display range: 0-232 PSI (16BAR)
• Electronic Sensors: 1/8NPT
• Sensor three core wire:
  Red-sensor 5V input
  Black-sensor GND input
  Yellow-sensor signal output
• Power supply two core wire:
  Red-positive pole (ACC)
  Black-negative pole (grounding)

Package

• 1 X Gauge(5meters long wires)
• 1 X Holder
• 2 X High Quality 1/8Npt 1.6MPA Electronic sensor
• 1 x Gauge Panel
• 1 x 10m air hose
• 2 x 1/4 PU T Piece
• 1 x 1/4 PU TO 2/4 BSP Male Fitting
• Mounting Bracket
• Mounting Bracket Hardware
• Installation Instructions

Caution

• Sensors MUST be placed in a dry area to prevent water ingress, where possible mount the sensors at 45 degree angle to reduce risk further.
• Water interference will cause the sensors to not work correctly. Water damage to the sensors will not be covered under warranty.